We provide a branded Spout Kegerator which can be used to store kegs and dispense milk. Each kegerator stores up to five milk kegs (50 litres) inside. And follows standard milk fridge sizing to easily fit into existing kitchen spaces. The system can be used standalone or built into benchtops for a seamless look.

We’ll work with you to make sure you’re set up with the right solution that works for your space and your team. In addition to providing the equipment, we’ll set up the system and provide a training session to your team. This will cover the operation of the system, cleaning and an operation guide to refer to when needed.

For low-volume users, we offer a pump solution which screws onto the top of a keg. If you choose to use a keg pump, you will need to store kegs in your own refrigerator. Each keg measures 500mm H x 175mm W .

Each kegerator measures 1325mm x 616mm x 605mm including the tap tower. Kegerator units come with a 70mm guard rail that can be removed when fitting under bench tops. The tap tower can be detached and installed separately from the kegerator for under-bench installs. An additional 250mm space is required to store the nitrogen gas bottle either behind or beside the unit.

The kegs are pressurised by food-grade Nitrogen. We recommend using a D-sized bottle. Nitrogen ordering is managed by the customer. We can assist with an account set up with BOC if you do not have an existing gas supplier.

Just like a coffee machine, our system needs to be cleaned daily. We provide the cleaning equipment and the first 6 months of cleaning solution. The cleaning solution can then be reordered as needed, through the Fresho system.